CPUz 1.40 validated tredude | Opteron 170 | 0550VPMW | 2800Mhz | 10X280 | 1.4v | A8N-sli Premium | XP90C | Dual Prime kimnkk | Opteron 165 | CCBWE 0536MPMW | 2600MHz | 289x9 | 1.47V | DFI NF4 Ultra-D | TT Big Typhoon | SP2004 .
Please submit new entries or correction of existing entries using send-pr(1) or web form. On-board n Force ethernet controller will only work with nve(4) which is only in 6-CURRENT (as of Apr 2005). Onboard Marvell IDE chip is not supported, needs 7-CURRENT.On-board n Force SATA RAID controller works with 6-CURRENT of June 6 2005 and newer. Onboard SATA chip is not supported in AHCI mode, switch to RAID mode in BIOS, or use 7-CURRENT. Unsupported devices: winmodem, flash card reader, fingerprint scanner.i have restored the results from that file rather than the first post of the other thread, since i thought i hadn't made any other changes since then, obviously i was mistaken anyway, if anyones results arent in the above posts, or the entry is possibly outdated could you either post here or pm me with the correct entry.Can't seem to search the thread for your result T_M as the db crashes or something That is a great idea..your initial question it seemed like you wanted ppl to just post their temps without having their O/C results..breaking Sephir0ths thread rules.Has no PS/2 ports, must use USB keyboard on rear connector (front connector for some reason does not like USB keyboard at boot). X does not have accelerated support for the ATI Radeon XPRESS 200M 5955.
Only has low-profile PCIx sockets, making expansion tricky. Switching between X and consoles occasionally produces a corrupt display, but closing and opening the lid almost always fixes this. powerd causes random hard lockups (there is a problem with speed changing under load).
Everything is functional, except onboard SCSI controller, which is not recognized (LSI SAS controller). Built-in Broadcom bge interfaces seem to be working OK. The default kernel included with the 5.4-RELEASE amd64 distribution does not see hard drives attached via the Intel ICH5R SATA/ATA controller. AIC7902 U320 SCSI operates successfully with Seagate ST373207LC drives (gives an "Invalid Sequencer interrupt" when probing the SCSI bus, but then continues). X11 on onboard ATI Rage XL is not working because will not use "sync on green".
Built-in AIC7902 U320 SCSI operates successfully with Seagate ST3146854LC drive (no errors or warnings). Workaround is to boot using safe mode during install and when booting default kernel. ZCR not tested (no driver for Adaptec 2010-S), AIC7902 U320 SCSI not tested. UP kernel must be booted in "safe mode" (or 0.disabled="0", tried both BIOS revisions 1.2 and 1.2a). Tested and working: rs232 console, SATA, PATA, USB, Firewire, PCI slots.
I don't know if I can even clearly express the weirdness of this situation. All it seems to lack is 3D video performance, compared with the current New Hotness systems. Can it be true that all I need do to bring myself back within 10% of the cutting edge is swap in a new graphics card? Every PC enthusiast knows that a one-year-old PC that was high-spec when it was new may, objectively, still be a perfectly OK system for pretty much any purpose.
look, I know how this sounds, but it still pretty much is up there with the best.
Tamille | Opteron 146 | CABNE 0530APMW | 3000mhz | 10 x 300 | 1.488v | DFI Ultra-D | Tuniq 120 tower | Super PI 32M Cae Siu M-X | Opteron 146 | CACJE 0605 APHW | 3000Mhz | 10x300HTT | 1.42v | DFI Lanparty Ultra-D | TT Big Typhoon | Super PI 32M the _rick | Opteron 148 | CABYE 0540FPBW | 2997mhz | 11 x 272.5 | 1.408v | DFI NF4 SLi-D | Air (XP-90 with stock 92mm fan) | Super Pi 32m Voltus | Opteron 148 | CAB2E 0545MPMW | 2951MHz | 11x268 |1.52v | Asus A8N Sli - Premium | Zalman 9500 | Super Pi 32M FTO | Opteron 146 | CABYE 0540FPBW | 2950MHz | 10x295HTT | 1.55v | Asrock 939DUAL-SATA2 | Zalman 9500Cu | Super Pi 32M aussie-revhead | Opteron 146 | CABYE 0540FPMW | 2950 MHz | 10x295 | 1.525v | DFI SLI-D | Hyper Cooler4 | OCCT Baba | Opteron 148 | CACJE 0546APAW | 2950MHz | 10x295 | 1.55v | DFI NF4 Ultra-D | Thermaltake Big Typhoon | 32M Super Pi bbjayo | Opteron 146 | CABYE 0543FPMW | 2944Mhz | 10x294 | 1.5v | DFI NF3 Ultra-D | Zalman 7700Cu | Super Pi 32M orbisfactor | Opteron 144 | CAB2E 0545CPAW | 2943MHz | 327X9 | 1.648v(cpu-z) | DFI NF4 Ultra-D | Thermalright XP-120 w/ Panaflo fan | Super Pi 32M Danske | Opteron 144 | CACJE 0606BPAW | 2929Mhz | 9 x 325HTT | 1.6V | Abit KN8 SLi | Arctic Cooling Freezer 64 | Super PI 32M & Others barrel | Opteron 144 | CAB2E 0546FPMW | 2925.6Mhz | 9 x 325.1Mhz | 1.6v | DFI n F4 SLI-D (623-3) | Zalman CNPS9500 |Super Pi 32M 5days | Opteron 146 | CAB2E 0540FPMW | 2920MHz | 292x10 | 1.4V | DFI NF4 Ultra-D | Zalman CNPS7000Cu | Super Pi 32M mental_empathy | Opteron 146 | CAB2E 0546 GPAW | 2920MHz | 10 x 292 | 1.50v | DFI NF4 Ultra D | Big typhoon / Panaflo High Speed @ 7V | Super Pi 32M Phat_Jad | Opteron 146 | 0540/FPAW | 2919Mhz | 10 x 291| 1.504v | Asus A8N-Sli Deluxe | CM - Hyper6 | 3DMark05 mikeyyy | Opteron 144 | CAB2E 0545 CPAW | 2917MHz | 324X9 | 1.600v | DFI NF4 Ultra-D | Big Typhoon | Super Pi 32M [ r2 ] | Opteron 148 | CABYE 0543FPMW | 2915Mhz | 11x265 | 1.392v | Asus A8N-SLI Premium | XP-90 | Super Pi 32M Modafroman | Opteron 148 | CAB2E 0545MPMW | 2915mhz | 11x265 | 1.648v | DFI SLI-DR | Arctic Cooling Freezer 64 Pro | Yes Superpi 32M TMM | Opteron 148 | CAB2E 0545MPMW | 2908Mhz | 11x264 | 1.57v | MSI K8N Neo2 | XP-120 | Super Pi 32M Catalyst2211 | Opteron 144 | CABYE 0536GPMW | 2906MHz | 323X9 | 1.68v(bios) | DFI NF4 Ultra-D | Thermalright XP-120 | Super Pi 32M Naphez | Opteron 146 | CAB2E 0546FPAW | 2900MHz |10 x 290 | 1.57v | DFI NF4 Ultra D | Gigabtye Neon Cooler 8 | Super Pi 32M Agent VX | Opteron 146 | CAB2E 0540FPMW | 2875MHz | 319.4x9 | 1.45V | Abit AN8 Ultra | XP-90 Sunon 92mm | OCCT stable drnick | Opteron 148 | CAB2E 0545 MPMW | 2860MHz | 11 x 260 | 1.56v | DFI NF4 UT SLI-DR EXPERT | Arctic Freezer 64 Pro | Super PI 32M Dukkie | Opteron 144 | CABYE 0536GPMW | 2842mhz | 9 x 316 | 1.44v | DFI NF4 Ultra-D (704-2BTA BIOS) | TT Big Typhoon AS5 | Stress CPU & Super Pi 1M Chester Mc Cheese| Opteron 144 | CABYE 0536 | 2835mhz | 315 x 9 | 1.5V | DFI n F4 Ultra-D (704-2 BIOS)| Zalman 7000 Al/Cu | Super Pi 32M TMM | Opteron 148 | CAB2E 0545 MPMW | 2808MHz | 10x280 | 1.45V | MSI K8N Neo2 (1.